- CentOS 4.6 Server Setup - LAMP, Email, DNS, FTP, ISPConfig (a.k.a. The Perfect Server)
This tutorial shows how to set up a CentOS 4.6 based server that offers all services needed by ISPs and web hosters: Apache web server (SSL-capable), Postfix mail server with SMTP-AUTH and TLS, BIND DNS server, Proftpd FTP server, MySQL server, Dovecot POP3/IMAP, Quota, Firewall, etc. This tutorial is written for the 32-bit version of CentOS 4.6, but should apply to the 64-bit version with very little modifications as well.
in Public bookmarks - CentOS 5.1 Server Setup - LAMP, Email, DNS, FTP, ISPConfig (a.k.a. The Perfect Server)
This tutorial shows how to set up a CentOS 5.1 based server that offers all services needed by ISPs and web hosters: Apache web server (SSL-capable), Postfix mail server with SMTP-AUTH and TLS, BIND DNS server, Proftpd FTP server, MySQL server, Dovecot POP3/IMAP, Quota, Firewall, etc. This tutorial is written for the 32-bit version of CentOS 5.1, but should apply to the 64-bit version with very little modifications as well.
in Public bookmarks - How To Install mod_ruby On Various Linux Distributions For Use With ISPConfig (2.2.20 And Above)
Starting with version 2.2.20, ISPConfig has built-in support for Ruby. Instead of using CGI/FastCGI, ISPConfig depends on mod_ruby being available in the server's Apache. This article explains how to install mod_ruby on various Linux distributions supported by ISPConfig.
in Public bookmarks - How To Run Your Own DNS Servers (Primary And Secondary) With ISPConfig 3 (Debian Squeeze)
This tutorial shows how you can run your own DNS servers (primary and secondary) with ISPConfig 3. To do this, you need two servers with two different public IP addresses and with ISPConfig 3 installed. I will use Debian Squeeze for both DNS servers here to demonstrate the base system setup process and ISPConfig 3 installation, but once you have ISPConfig 3 installed on your servers, the configuration inside ISPConfig 3 is identical, no matter what distribution you use.
in Public bookmarks - How To Set Up suPHP On A Debian Etch Based ISPConfig Server | HowtoForge
This tutorial shows how to install and use suPHP with the ISPConfig control panel on a Debian Etch server. When you have set up suPHP on your ISPConfig server, you are able to run the PHP scripts under the admin user of the website instead of the Apache user.
in Public bookmarks - How To Use Multiple PHP Versions (PHP-FPM & FastCGI) With ISPConfig 3 (CentOS 6.3)
Since ISPConfig 3.0.5, it is possible to use multiple PHP versions on one server and select the optimal PHP version for a website. This feature works with PHP-FPM (starting with PHP 5.3) and FastCGI (all PHP 5.x versions). This tutorial shows how to build PHP 5.3 and PHP 5.4 as a PHP-FPM and a FastCGI version on a CentOS 6.3 server. These PHP versions can be used together with the default PHP (installed through yum) in ISPConfig.
in Public bookmarks - How To Use Multiple PHP Versions (PHP-FPM & FastCGI) With ISPConfig 3 (Debian Wheezy)
Since ISPConfig 3.0.5, it is possible to use multiple PHP versions on one server and select the optimal PHP version for a website. This feature works with PHP-FPM (starting with PHP 5.3) and FastCGI (all PHP 5.x versions). This tutorial shows how to build PHP 5.3 and PHP 5.4 as a PHP-FPM and a FastCGI version on a Debian Wheezy server. These PHP versions can be used together with the default PHP (installed through apt) in ISPConfig.
in Public bookmarks - How To Use Multiple PHP Versions (PHP-FPM & FastCGI) With ISPConfig 3 (Ubuntu 12.04 LTS)
Since ISPConfig 3.0.5, it is possible to use multiple PHP versions on one server and select the optimal PHP version for a website. This feature works with PHP-FPM (starting with PHP 5.3) and FastCGI (all PHP 5.x versions). This tutorial shows how to build PHP 5.3 and PHP 5.4 as a PHP-FPM and a FastCGI version on an Ubuntu 12.04 server. These PHP versions can be used together with the default PHP (installed through apt) in ISPConfig.
in Public bookmarks - How To Use Multiple PHP Versions (PHP-FPM & FastCGI) With ISPConfig 3 (Ubuntu 12.10)
Since ISPConfig 3.0.5, it is possible to use multiple PHP versions on one server and select the optimal PHP version for a website. This feature works with PHP-FPM (starting with PHP 5.3) and FastCGI (all PHP 5.x versions). This tutorial shows how to build PHP 5.3 and PHP 5.4 as a PHP-FPM and a FastCGI version on an Ubuntu 12.10 server. These PHP versions can be used together with the default PHP (installed through apt) in ISPConfig.
in Public bookmarks - How To Use Multiple PHP Versions (PHP-FPM & FastCGI) With ISPConfig 3 (Ubuntu 13.04)
Since ISPConfig 3.0.5, it is possible to use multiple PHP versions on one server and select the optimal PHP version for a website. This feature works with PHP-FPM (starting with PHP 5.3) and FastCGI (all PHP 5.x versions). This tutorial shows how to build PHP 5.3 and PHP 5.4 as a PHP-FPM and a FastCGI version on an Ubuntu 13.04 server. These PHP versions can be used together with the default PHP (installed through apt) in ISPConfig.
in Public bookmarks - How To Use PHP 4.4.9 (FastCGI) With Apache & ISPConfig 3 (Debian Wheezy)
Since ISPConfig 3.0.5, it is possible to use multiple PHP versions on one server and select the optimal PHP version for a website. If you have some very old websites on your server, they might not work with PHP5, but only with PHP4. This tutorial shows how to build PHP 4.4.9 as a FastCGI version for use with Apache2 on a Debian Wheezy server. This PHP version can be used together with the default PHP (installed through apt) in ISPConfig.
in Public bookmarks - Installing A Multiserver Setup With Dedicated Web, Email, DNS And MySQL Database Servers On Debian 5.0 With ISPConfig 3
This tutorial describes the installation of an ISPConfig 3 multiserver setup with dedicated web, email, database and two DNS servers all managed trough a single ISPConfig 3 control panel. The setup described below uses five servers and can be extended easily to to a higher number of servers by just adding more servers. E.g. if you want to have two mailservers, do the setup steps from chapter 2 on both of these servers. If you want to set up more web servers, then install ISPConfig on all other web servers in expert mode except of the first one.
in Public bookmarks - Installing A Web, Email & MySQL Database Cluster On Debian 6.0 With ISPConfig 3
This tutorial describes the installation of a clustered web, email, database and DNS server to be used for redundancy, high availability and load balancing on Debian 6 with the ISPConfig 3 control panel. MySQL Master/Master replication will be used to replicate the MySQL client databases between the servers and Unison will be used to Sync the /var/www (websites) and /var/vmail (email account data) folders.
in Public bookmarks - Installing A Web, Email And MySQL Database Cluster (Mirror) On Debian 5.0 With ISPConfig 3
This tutorial describes the installation of a clustered web, email, database and DNS server to be used for redundancy, high availability and load balancing on Debian 5 with the ISPConfig 3 control panel. GlusterFS will be used to mirror the data between the servers and ISPConfig for mirroring the configuration files. I will use a setup of two servers here for demonstration purposes but the setup can scale to a higher number of servers with only minor modifications in the GlusterFS configuration files.
in Public bookmarks - Installing OpenVZ + Management Of VMs Through ISPConfig 3 (Debian 6.0)
This tutorial describes the installation of an OpenVZ host server to manage virtual machines from within the ISPConfig 3 hosting control panel. OpenVZ is a lightweight virtualization technology for Linux servers, similar to jails on *BSD systems. ISPConfig 3 contains a module to manage OpenVZ virtual machines on the local server and on remote servers that run ISPConfig.
in Public bookmarks - Multiserver Setup With Dedicated Web, Email, DNS & MySQL Database Servers On Debian Squeeze With ISPConfig 3
This tutorial describes the installation of an ISPConfig 3 multiserver setup with dedicated web, email, database and two DNS servers all managed trough a single ISPConfig 3 control panel. The setup described below uses five servers and can be extended easily to to a higher number of servers by just adding more servers. E.g. if you want to have two mailservers, do the setup steps from chapter 2 on both of these servers. If you want to set up more web servers, then install ISPConfig on all other web servers in expert mode except of the first one.
in Public bookmarks - Running ISPConfig On Port 80 Using Apache's Reverse Proxy Feature (Debian Etch)
This article shows how you can configure a Debian Etch system that has the webhosting control panel ISPConfig installed so that ISPConfig can be accessed on port 80. By default ISPConfig uses port 81 which is a non-standard port and is blocked by some firewalls and ISPs. By using Apache's mod_proxy module, we can avoid this problem. It lets us create a reverse proxy that can fetch the pages from ISPConfig on port 81.
in Public bookmarks - Securing Your ISPConfig 3 Installation With A Free Class1 SSL Certificate From StartSSL
This tutorial shows how you can use a free Class1 SSL Certificate from StartSSL to secure your ISPConfig 3 installation and get rid of self-signed certificate warnings. The guide covers using the SSL certificate for the ISPConfig web interface (both Apache2 and nginx), Postfix (for TLS connections), Courier and Dovecot (for POP3s and IMAPs), and PureFTPd (for TLS/FTPES connections). If you've installed monit and use HTTPS for its web interface, I will show you how to use the StartSSL certificate for it as well. This guide assumes you use Debian or Ubuntu; the principle is the same for other distributions supported by ISPConfig 3, but paths might differ.
in Public bookmarks - The Perfect Server - CentOS 4.8 Server i386 [ISPConfig 2]
This tutorial shows how to set up a CentOS 4.8 server that offers all services needed by ISPs and web hosters: Apache web server (SSL-capable), Postfix mail server with SMTP-AUTH and TLS, BIND DNS server, Proftpd FTP server, MySQL server, Dovecot POP3/IMAP, Quota, Firewall, etc. In the end you should have a system that works reliably, and if you like you can install the free webhosting control panel ISPConfig (i.e., ISPConfig runs on it out of the box).
in Public bookmarks - The Perfect Server - CentOS 5.2
This tutorial shows how to set up a CentOS 5.2 server that offers all services needed by ISPs and web hosters: Apache web server (SSL-capable), Postfix mail server with SMTP-AUTH and TLS, BIND DNS server, Proftpd FTP server, MySQL server, Dovecot POP3/IMAP, Quota, Firewall, etc. This tutorial is written for the 32-bit version of CentOS 5.2, but should apply to the 64-bit version with very little modifications as well.
in Public bookmarks
Copyright © 2003-2010 Netvouz. All rights reserved. |
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy