- Installing Nginx With PHP5 (And PHP-FPM) And MySQL Support On CentOS 6.4
Nginx (pronounced "engine x") is a free, open-source, high-performance HTTP server. Nginx is known for its stability, rich feature set, simple configuration, and low resource consumption. This tutorial shows how you can install Nginx on a CentOS 6.4 server with PHP5 support (through PHP-FPM) and MySQL support.
in Public bookmarks - Installing The Galera-Iworx Cluster
This document describes the installation of the Galera/Interworx cluster. This cluster provides the default Load Balancing that is available within Interworx, and additionally MySQL loadbalancing through MySQL Galera Clustering.
in Public bookmarks - Installing The PHP-MemCache Module On CentOS 5.0
MemCached is a high-performance, distributed memory object caching system, generic in nature, but intended for use in speeding up dynamic web applications by alleviating database load. In this article I explain how you can very easily install it and make it avaible in PHP.
in Public bookmarks - Installing The PHP-MSSQL Module On CentOS 5.0
As you might have noticed on Centos 5.0, there is no PHP-MSSQL module/extension available in the default yum repositories. So if you want to use it you can alter the PHP binary or you can compile an mssql module/extension. In this article I will explain how to compile the mssql module/extension.
in Public bookmarks - Installing Xen On CentOS 5.0 (i386)
This tutorial provides step-by-step instructions on how to install Xen on a CentOS 5.0 system (i386). Xen lets you create guest operating systems (*nix operating systems like Linux and FreeBSD), so called virtual machines or domUs, under a host operating system (dom0). Using Xen you can separate your applications into different virtual machines that are totally independent from each other, but still use the same hardware.
in Public bookmarks - Installing Xen On CentOS 5.2 (i386)
This tutorial provides step-by-step instructions on how to install Xen on a CentOS 5.2 system. Xen lets you create guest operating systems (*nix operating systems like Linux and FreeBSD), so called virtual machines or domUs, under a host operating system (dom0). Using Xen you can separate your applications into different virtual machines that are totally independent from each other (e.g. a virtual machine for a mail server, a virtual machine for a high-traffic web site, another virtual machine that serves your customers' web sites, a virtual machine for DNS, etc.), but still use the same hardware. This saves money, and what is even more important, it's more secure. If the virtual machine of your DNS server gets hacked, it has no effect on your other virtual
in Public bookmarks - Installing Zimbra Collaboration Suite 7 On CentOS 5.x (64Bit)
This article explains how to install Zimbra Collaboration Suite 7 (ZCS) on CentOS 5.x (64Bit). Zimbra is a collaboration suite very widely used in the world. Users can share folders, contacts, schedules and other things, using a very rich web interface. One important note is that we're using CentOS 5 64bits, that is not oficially supported by Zimbra team (only RHEL and SUSE are). But CentOS works fine with Zimbra.
in Public bookmarks - Mail Server Setup With Exim, MySQL, Cyrus-Imapd, Horde Webmail On Centos 5.1 | HowtoForge
This guide describes the installation and configuration of a mail system on Centos 5.1 with SELinux enabled for enhanced security. This system will be able to service HTTP, HTTPS, SMTP, TLS, SMTP-AUTH, IMAP, POP3 clients and is virtual enabled allowing more than one domain to be served from the system.
in Public bookmarks - Managing A Headless VirtualBox Installation With phpvirtualbox (CentOS 6.2)
phpvirtualbox is a web-based VirtualBox front-end written in PHP that allows you to access and control remote VirtualBox instances. It tries to resemble the VirtualBox GUI as much as possible to make work with it as easy as possible. It is a nice replacement for the VirtualBox GUI if you run VirtualBox on headless servers. This tutorial explains how to install phpvirtualbox on a CentOS 6.2 server to manage a locally installed, headless VirtualBox.
in Public bookmarks - Managing OpenVZ With HyperVM On CentOS 5.2
HyperVM is a multi-platform, multi-tiered, multi-server, multi-virtualization web based application that will allow you to create and manage different virtual machines each based on different technologies across machines and platforms. Currently it supports OpenVZ and Xen virtualization and is available for RHEL 4/5 as well as CentOS 4 and CentOS 5. This tutorial shows how to install it on a CentOS 5.2 server to control OpenVZ containers. I will also explain how to manage OpenVZ containers with HyperVM on a remote CentOS 5.2 server ("slave").
in Public bookmarks - Managing OpenVZ With The Vtonf Control Panel On CentOS 5.2
Vtonf is a free web-based control panel (released under the GPL license) for managing virtual private servers (VPS) based on OpenVZ. It makes it very easy to create and manage OpenVZ VMs even for people with little technical knowledge. Right now, Vtonf is available only for RedHat, Fedora, and CentOS (support for Debian is planned), therefore I describe its installation and usage on a CentOS 5.2 server.
in Public bookmarks - Network Card Bonding On CentOS
Bonding is the same as port trunking. In the following I will use the word bonding because practically we will bond interfaces as one. Bonding allows you to aggregate multiple ports into a single group, effectively combining the bandwidth into a single connection. Bonding also allows you to create multi-gigabit pipes to transport traffic through the highest traffic areas of your network. For example, you can aggregate three megabits ports into a three-megabits trunk port. That is equivalent with having one interface with three megabytes speed.
in Public bookmarks - Paravirtualization With Xen On CentOS 5.3 (x86_64)
This tutorial provides step-by-step instructions on how to install Xen (version 3.0.3) on a CentOS 5.3 (x86_64) system. Xen lets you create guest operating systems (*nix operating systems like Linux and FreeBSD), so called "virtual machines" or domUs, under a host operating system (dom0). Using Xen you can separate your applications into different virtual machines that are totally independent from each other (e.g. a virtual machine for a mail server, a virtual machine for a high-traffic web site, another virtual machine that serves your customers' web sites, a virtual machine for DNS, etc.), but still use the same hardware. This saves money, and what is even more important, it's more secure. If the virtual machine of your DNS server gets hacked, it has no e
in Public bookmarks - Paravirtualization With Xen On CentOS 5.4 (x86_64)
This tutorial provides step-by-step instructions on how to install Xen (version 3.0.3) on a CentOS 5.4 (x86_64) system. Xen lets you create guest operating systems (*nix operating systems like Linux and FreeBSD), so called "virtual machines" or domUs, under a host operating system (dom0). Using Xen you can separate your applications into different virtual machines that are totally independent from each other, but still use the same hardware.
in Public bookmarks - Paravirtualization With Xen On CentOS 5.6 (x86_64)
This tutorial provides step-by-step instructions on how to install Xen (version 3.0.3) on a CentOS 5.6 (x86_64) system. Xen lets you create guest operating systems (*nix operating systems like Linux and FreeBSD), so called "virtual machines" or domUs, under a host operating system (dom0). Using Xen you can separate your applications into different virtual machines that are totally independent from each other, but still use the same hardware.
in Public bookmarks - Serving CGI Scripts With Nginx On CentOS 6.0
This tutorial shows how you can serve CGI scripts (Perl scripts) with nginx on CentOS 6.0. While nginx itself does not serve CGI, there are several ways to work around this. I will outline two solutions: the first is to proxy requests for CGI scripts to Thttpd, a small web server that has CGI support, while the second solution uses a CGI wrapper to serve CGI scripts.
in Public bookmarks - Serving CGI Scripts With Nginx On CentOS 6.3
This tutorial shows how you can serve CGI scripts (Perl scripts) with nginx on CentOS 6.3. While nginx itself does not serve CGI, there are several ways to work around this. I will outline two solutions: the first is to proxy requests for CGI scripts to Thttpd, a small web server that has CGI support, while the second solution uses a CGI wrapper to serve CGI scripts.
in Public bookmarks - Setting Up An NFS Server And Client On CentOS 5.5
This guide explains how to set up an NFS server and an NFS client on CentOS 5.5. NFS stands for Network File System; through NFS, a client can access (read, write) a remote share on an NFS server as if it was on the local hard disk.
in Public bookmarks - Setting Up PHPlist (Open-Source Newsletter Manager)
This document describes how to set up PHPlist on Fedora, CentOS, Ubuntu and Debian. This howto should also work for other distributions with little modifications. Taken from the phplist page: "phplist is an open-source newsletter manager. phplist is free to download, install and use, and is easy to integrate with any website. phplist is downloaded more than 10 000 times per month and is listed in the top open source projects for vitality score on Freshmeat."
in Public bookmarks - The Perfect Server - CentOS 4.5 (32-bit)
This tutorial shows how to set up a CentOS 4.5 server that offers all services needed by ISPs and web hosters: Apache web server (SSL-capable), Postfix mail server with SMTP-AUTH and TLS, BIND DNS server, Proftpd FTP server, MySQL server, Dovecot POP3/IMAP, Quota, Firewall, etc. This tutorial is written for the 32-bit version of CentOS 4.5, but should apply to the 64-bit version with very little modifications as well.
in Public bookmarks
Copyright © 2003-2010 Netvouz. All rights reserved. |
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy