- How To Enable Multiple HTTPS Sites For One IP On Debian Etch Using TLS Extensions
This guide is Debian specific but could be ported to other distributions since the concept is the same. In order to use TLS Extensions we have to patch and recompile Apache2 and recompile OpenSSL with the enable-tlsext directive. Since TLS extensions are relatively new, some Internet browsers will not work so the Apache2 server will deliver just the default site as http 1.0 does on an http 1.1 server.
- How To Enable Networking In Xen Guests On Hetzner's New EQ Servers (Debian Lenny)
This tutorial shows how you can enable networking in Xen guests (domU) on Hetzner's new EQ servers. With the new EQ servers, you can get up to three additional IPs that are in the same subnet as the server's main IP. The problem is that these additional IPs are bound to the MAC address of the host system (dom0) - Hetzner's routers will dump IP packets if they come from an unknown MAC address. This means we cannot use Xen's bridged mode, but must switch to Xen's routed mode where the host system (dom0) acts as the gateway for the guests.
- How To Enable NTFS Write Support (ntfs-3g) On Mandriva 2007 Spring
Normally Linux systems can only read from Windows NTFS partitions, but not write to them which can be very annoying if you have to work with Linux and Windows systems. This is where ntfs-3g comes into play. ntfs-3g is an open source, freely available NTFS driver for Linux with read and write support. This tutorial shows how to install and use ntfs-3g on a Mandriva 2007 Spring desktop to read from and write to Windows NTFS drives and partitions.
- How To Enable NTFS Write Support (ntfs-3g) On Ubuntu Feisty Fawn
Normally Linux systems can only read from Windows NTFS partitions, but not write to them which can be very annoying if you have to work with Linux and Windows systems. This is where ntfs-3g comes into play. ntfs-3g is an open source, freely available NTFS driver for Linux with read and write support. This tutorial shows how to install and use ntfs-3g on an Ubuntu Feisty Fawn desktop to read from and write to Windows NTFS drives and partitions.
- How to encrypt a diskdrive in (X)ubuntu Feisty with dm-crypt and LUKS | HowtoForge - Linux Howtos and Tutorials
Today security is one of the key aspects in our daily life - sometimes conscious, sometimes unconscious. Security has many aspects and one of them is computer security or security of your or your business' computer data. In this tutorial I will show how to encrypt a whole disk drive using (X)Ubuntu Feisty, dm-crypt, and LUKS.
by 2 users - How To Encrypt Directories/Partitions With eCryptfs On Debian Squeeze
eCryptfs is a POSIX-compliant enterprise-class stacked cryptographic filesystem for Linux. You can use it to encrypt partitions and also directories that don't use a partition of their own, no matter the underlying filesystem, partition type, etc. This tutorial shows how to use eCryptfs to encrypt a directory on Debian Squeeze.
by 2 users - How To Encrypt Mails With SSL Certificates (S/MIME)
This article is about how to use the S/MIME encryption function of common e-mail clients to sign and/or encrypt your mails safely. S/MIME uses SSL certificates which you can either create yourself or let a trusted certificate authority (CA) create one for you.
- How To Harden PHP5 With Suhosin On CentOS 5.0
This tutorial shows how to harden PHP5 with Suhosin on a CentOS 5.0 server. From the Suhosin project page: "Suhosin is an advanced protection system for PHP installations that was designed to protect servers and users from known and unknown flaws in PHP applications and the PHP core. Suhosin comes in two independent parts, that can be used separately or in combination. The first part is a small patch against the PHP core, that implements a few low-level protections against bufferoverflows or format string vulnerabilities and the second part is a powerful PHP extension that implements all the other protections."
- How To Harden PHP5 With Suhosin On Fedora 7
This tutorial shows how to harden PHP5 with Suhosin on a Fedora 7 server. From the Suhosin project page: "Suhosin is an advanced protection system for PHP installations that was designed to protect servers and users from known and unknown flaws in PHP applications and the PHP core. Suhosin comes in two independent parts, that can be used separately or in combination. The first part is a small patch against the PHP core, that implements a few low-level protections against bufferoverflows or format string vulnerabilities and the second part is a powerful PHP extension that implements all the other protections."
- How To Implement Domainkeys In Postfix Using dk-milter
Domainkeys is "a method of e-mail authentication. Unlike some other methods, it offers almost end-to-end integrity from a signing to a verifying Mail Transfer Agent (MTA). In most cases the signing MTA acts on behalf of the sender, and the verifying MTA on behalf of the receiver. DomainKeys is specified in Historic RFC 4870, which is obsoleted by Standards Track RFC 4871, DomainKeys Identified Mail (DKIM) Signatures." according to the wikipedia. So why a how to on it when there is DKIM? Well domainkeys is still actively being used and is more widely deployed than DKIM, the developer Yahoo still uses it to sign and verify mail although they are contributers to the DKIM standard.
- How To Install & Set Up Dovecot Mail Server With Sieve And Virtual Users
This document describes how to install the Dovecot mail server from source as an imap / pop3 mail server for your domain and how to set up the sieve plugin so your clients can use the sieve mail filtering language for their mail accounts.
- How To Install A Complete LEMP (Linux - EngineX (Nginx HTTP SERVER) - Mysql - PHP) Server On Ubuntu/Debian
This HowTo will describe the setup of an efficient http server and mail server for small or medium configurations (as low as 96 mb). Why LEMP instead of LAMP? NGINX is a great replacement for Apache with very low memory footprint and great stability.
by 2 users - How To Install And Configure Dansguardian With Multi-Group Filtering And Squid With NTLM Auth On Debian Etch
This how-to describes how to install and configure Dansguardian with multi-group filtering, Squid with NTLM auth, ipmasq, and dnsmasq to provide a full internet gateway solution for small to medium sized networks. This how-to requires two NICs in order to perform firewalling and transparent proxying.
- How To Install And Configure Mailman (With Postfix) On Debian Squeeze
Mailman is an open-source mailing list manager, i.e., it can be used to manage email discussions and newsletter lists. It is probably the most popular and widely used mailing list manager on the Internet. This tutorial explains how to install and configure Mailman on a Debian Squeeze server with a Postfix mail server.
- How To Install And Use MyDLP
This document can be used as a guide to installation of MyDLP Appliance. It also describes the basic usage. MyDLP is an easy, simple and open DLP (data loss prevention) solution, licensed under GPLv3. MyDLP 1.0 was released on 10 November 2010. MyDLP Appliance is a distribution based on Ubuntu Server. The distribution comes as a easy to deploy key solution. Protecting customer records, securing confidential files, data flow enforcements... this is all achievable within 30 minutes.
- How To Install And Use The djbdns Name Server On Debian Etch
djbdns is a very secure suite of DNS tools that consists out of multiple parts: dnscache, a DNS cache that can be used in /etc/resolv.conf instead of your ISP's name servers and that tries to sort out wrong (malicious) DNS answers; axfrdns, a service that runs on the master DNS server and to which the slaves connect for zone transfers; and tinydns, the actual DNS server, a very secure replacement for BIND.
- How To Install Cinnamon Desktop On Fedora 18
This tutorial shows how you can install Linux Mint's Cinnamon desktop on Fedora 18. Since it has now been included in the repositories this can now be done quite quickly. Fedora's default desktop at the moment is GNOME 3.
- How To Install Django On Debian Etch (Apache2/mod_python)
This tutorial explains how to install Django on a Debian Etch server. Django is a web framework that allows to develop Python web applications quickly with as much automation as possible. I will use it with Apache2 and mod_python in this guide.
- How To Install Django On Mandriva 2008.1 (Apache2/mod_python)
This tutorial explains how to install Django on a Mandriva 2008.1 server. Django is a web framework that allows to develop Python web applications quickly with as much automation as possible. I will use it with Apache2 and mod_python in this guide.
- How To Install Google Earth On Ubuntu 10.10
In previous Ubuntu versions, there was a Google Earth .deb package available in the Medibuntu repository; unfortunately there is no such package for Ubuntu 10.10 (Maverick Meerkat). While it is possible to install the Google Earth package for Ubuntu 10.04 on Ubuntu 10.10, there is another way of installing Google Earth on Ubuntu 10.10. The method described in this tutorial will create a Google Earth .deb package for Ubuntu 10.10 from which Google Earth can be installed.
Bookmarks 161 - 180
Copyright © 2003-2010 Netvouz. All rights reserved. |
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy