- Upgrade Debian Lenny To Squeeze In A Few Simple Steps
One rather old laptop and one server were the test objects for this howto. Both systems do not have any RAID devices and use a simple partition scheme from a default basic Lenny install. If your setup deviates much from this, it's highly recommended to read all details of the Debian Release Notes before you continue. Be warned. All commands are run as root and Debian recommends to use apt-get for the Squeeze upgrade process.
- Upgrade Your Desktop From Fedora 8 To Fedora 9 With PreUpgrade
This document describes how to upgrade your desktop from Fedora 8 to Fedora 9 via PreUpgrade. PreUpgrade provides a frontend that allows the user to easily download all packages that are needed for the distribution upgrade, and then perform the distribution upgrade.
- Upgrade/Migrate VMware ESX / ESXi 4.* To ESXi 5.0
This tutorial outlines how to upgrade VMware ESX/ESXi 4.x to ESXi 5.0. VMware has recently released its new VM hypervisor product, VMware ESXi 5.0. VMware is replacing its current ESX model with ESXi and the biggest change (between ESX and ESXi) is the architecture.
- Using Apache2 Content Negotiation To Serve Different Languages
Content negotiation is the ability of a web server to deliver the document that best matches the browser's preferences/capabilities. For example, if a resource exists in multiple languages, the web server can choose which variant it serves based on the Accept-Language header delivered by the browser. This tutorial describes how to configure content negotiation in Apache2 to serve different languages based on browser preferences.
- Using ATA Over Ethernet (AoE) On CentOS 6.3 (Initiator And Target)
This guide explains how you can set up an AoE target and an AoE initiator (client), both running CentOS 6.3. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using ATA Over Ethernet (AoE) On Debian Lenny (Initiator And Target)
This guide explains how you can set up an AoE target and an AoE initiator (client), both running Debian Lenny. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using ATA Over Ethernet (AoE) On Debian Squeeze (Initiator And Target)
This guide explains how you can set up an AoE target and an AoE initiator (client), both running Debian Squeeze. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using ATA Over Ethernet (AoE) On Fedora 10 (Initiator And Target)
This guide explains how you can set up an AoE target and an AoE initiator (client), both running Fedora 10. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using ATA Over Ethernet (AoE) On Ubuntu 12.04 (Initiator And Target)
This guide explains how you can set up an AoE target and an AoE initiator (client), both running Ubuntu 12.04. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using ATA Over Ethernet On Debian Etch
Imagine you have a machine with all of its disk full and another with unused gigabytes, and you do not want to move the data from one to the other. Why not use the second's disk on the first, you could do it with iSCSI, but you can do it with ATA over Ethernet (AoE) as well. It is the second method I will explain in this article. All of this was made with two computers running Debian Etch.
- Using Compiz, Beryl, And Metisse On A Mandriva 2007 Spring Desktop
This tutorial shows how you can use Compiz, Beryl, and Metisse on a Mandriva 2007 Spring (Mandriva 2007.1) desktop (the system must have a 3D-capable graphics card). With Compiz, Beryl, and Metisse, you can make your desktop use beautiful 3D effects like wobbly windows or a desktop cube (although the desktop cube is not available on Metisse).
- Using eBox As A Gateway: Firewall, Traffic Shaping, HTTP Proxy And More
eBox Platform is the Linux small business server that allows you to manage all your network services like firewall, DHCP, DNS, VPN, proxy, IDS, mail, file and printer sharing, VoIP, IM and much more. These functionalities are tightly integrated, automating most tasks, avoiding mistakes and saving time for system administrators. This article will show you step by step how to use eBox as a Gateway, featuring network configuration, load balancing between two Internet connections with WAN failover and multigateway rules for policy routing, traffic shaping, DHCP and DNS cache for the LAN network and HTTP proxy with different content filtering policies and antivirus.
- Using eBox As Windows Primary Domain Controller
eBox Platform is an open source small business server that allows you to manage all your services like firewall, DHCP, DNS, VPN, proxy, IDS, mail, file and printer sharing, VoIP, IM and much more. These functionalities are tightly integrated, automating most tasks, avoiding mistakes and saving time for system administrators. This tutorial shows you step by step how to use eBox as a Windows Primary Domain Controller. At the end of it you will be using eBox Platform 1.2 for users and shared resources management on your Windows domain.
- Using IPv6 On Debian Etch
This document describes how you can configure a Debian Etch system for IPv6 so that a) it can connect to other IPv6 hosts and b) other IPv6 hosts can connect to it. IPv6 should become more important in the future as recent estimates assume that there will be no more IPv4 addresses left by 2010 or 2011. Therefore it's time time to learn IPv6.
- Using iSCSI On Debian Lenny (Initiator And Target)
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Debian Lenny. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using iSCSI On Debian Squeeze (Initiator And Target)
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Debian Squeeze. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using iSCSI On Fedora 10 (Initiator And Target)
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Fedora 10. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using iSCSI On Ubuntu 10.04 (Initiator And Target)
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Ubuntu 10.04. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using iSCSI On Ubuntu 9.04 (Initiator And Target)
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Ubuntu 9.04. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
- Using KVM On Ubuntu 7.10 (Gutsy Gibbon)
In this HowTo I will explain how to install and use KVM for running your services in virtual machines. KVM (Kernel-based Virtual Machine) is a Linux kernel virtualization technique that provides full virtualization by using Intel VT (Vanderpool) or AMD-V (Pacifica).
by 2 users
Bookmarks 861 - 880
Copyright © 2003-2010 Netvouz. All rights reserved. |
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy
RSS Feed
|
Blog |
Contact |
Terms of use |
Cookies |
Privacy policy